NEW 2023: Figures in 1/32!

Reifenstapel Modellbau Blau Weiss mit Kiesbett und FlexCurbs RAS
Modellbau Reifenstapel 25 cm mit 3 Befestigungen
Diarama Modellbau RAS Reifenstapel FlexCurbs Blau Weiss
Modellbau Reifenstapel 25cm Kiesbett FlexCurbs
Diarama Modellbau NSR Audi R9 Reifenstapel Blau Weiss 25 cm
Masstab Modellbau Reifen Stapel 132 und 124
Modellbau Reifenstapel 25cm Blau Weiss RAS
Diorama mit Reifen Stapel Modellbau  Curbs Rand Streifen und Kiesbett
Reifenstapel Modellbau Blau Weiss NSR R8 Audi
Modellbau Reifen Stapel blau weiss auf Diorama mit Kiesbett

Tire stack model building 25 cm BLUE WHITE 1:32 - 1:24 Tire stack for Carrera racetrack

Regular price
€5,90
Sale price
€5,90
Tax included. Shipping calculated at checkout.
Quantity must be 1 or more

Full throttle into the tire pile! No problem with our model tire pile for Carrera racetracks length 25cm BLUE WHITE for scale 1:32 - 1:24 - tire pile Carrera racetrack.

The model tire stack consists of 3 layers of soft foam and has the shape of lying tire stacks. Thus, vehicles are braked and no longer damaged. The stacks can be mounted next to each other, behind each other and on top of each other.

The set contains:

  • 1 piece tire stack length 25 cm
  • 3 pieces mounting sleeves with internal thread M4
  • 3 pieces countersunk screws M4x16

Dimensions: Tire stack dimensions (length x width x height) 250mm x 23mm x 30mm

Included in the delivery are a 25cm long tire stack and mounting sleeves and 3 screws. When mounting, the black fasteners with internal thread are screwed from below. It can be drilled through a rail or edge strip. Alternatively, a piece of wood can be used as an edge strip next to the rail.

After fastening, only the black fastener is visible and the tire stack can be put on and removed for cleaning. The fasteners do not peek out of the stack.

If you do not want to screw from below, there is a fastening set with sleeves without internal thread. The fasteners can either be mounted from above or attached directly to the web with a glue dot or hotmelt adhesive. This fastening set is available as an article in the online store www.ras-racing.de .

The article is available in 2 lengths - 25 cm and 99 cm. If a model tire stack of, for example, 50 cm in length is to be installed, it must be considered that a cutting edge will occur when cutting the tire stack. Here we recommend using 2 x 25 cm so that the stacks look even.

And now have fun building!

English