Full throttle into the tire pile! No problem with our model tire stacks > for Carrera racetracks BLACK WHITE 1:32 - 1:24
Tire stack for - 25cm BLUE WHITE for scale 1:32 - 1:24
The product consists of several layers of foam and has the shape of lying tire stacks. Vehicles are braked and no longer damaged. The stacks can be mounted next to each other, behind each other and on top of each other, for example, for trucks.
The set contains:
1 piece tire stack length 25 cm
3 pieces mounting sleeves with internal thread M4
3 pieces countersunk screws M4x16
Dimensions: Tire stack dimensions (length x width x height) 250mm x 23mm x 30mm
The scope of delivery includes a 25cm long tire stack and mounting sleeves and 3 screws. There are other color and length variations.
When mounting, the black fasteners with internal thread are screwed from below. It can be drilled through a rail or edge strip. Alternatively, a piece of wood can be used as an edge strip next to the rail.
After fastening, only the black fastener is visible and the tire stack can be put on and removed for cleaning the track. The fasteners do not peek out of the stack.
If you do not want to screw from below, there is a mounting kit with sleeves without internal thread. The mounting can be done from the top or can be fixed directly to the web with a glue dot or hot glue dot. This fastening set is available as an article in the online store www.ras-racing.de.
There are 2 lengths for this article: 25 cm & 99 cm. If a tire pile of, for example, 50 cm in length is to be installed, it must be considered that a cutting edge will be created when cutting the tire pile. Here it is recommended to use 2 x 25 cm so that the stacks look even.
And now have fun building!