Full throttle into the crash barriers! No problem with our model tire stack > for Carrera racetracks BLUE YELLOW 1:32 - 1:24
Model tire stack for race track - 99cm BLUE YELLOW 1:32 - 1:24
The product is made of 3 layers of foam and has the shape of lying tire stacks. Vehicles are braked and no longer damaged. The stacks can be mounted next to each other, behind each other and on top of each other, for example, for trucks.
The set contains:
1 piece tire stack L 99 cm
5 pieces fixing sleeves with internal thread M4
5 pieces countersunk screws M4x16
Dimensions: Tire stack dimensions (length x width x height) 988mm x 23mm x 30mm
The delivery includes a 99 cm long tire stack and mounting sleeves and 5 screws. There are other color variations and length variations. When mounting, the black fasteners with internal thread are screwed from below. It can be drilled through a rail or edge strip. Alternatively, a piece of wood can be used as an edge strip next to the rail.
After fastening, only the black fastener is visible and the tire stack can be put on and removed for cleaning the track. The fasteners do not peek out of the stack.
If you do not want to screw from below, there is a mounting kit with sleeves without internal thread. The mounting can be done from the top or can be fixed directly to the web with a glue dot or hot glue dot. This fastening set is available as an article in the online store www.ras-racing.de.
The article is available in 2 lengths - 25 cm and 99 cm. If a tire stack of, for example, 50 cm in length is to be installed, it must be remembered that a cutting edge will occur when cutting the tire stack. Here it is recommended to use 2 x 25 cm, so that the stacks look even.
And now have fun building!
